DROP-IN ANCHOR EKD-K, ZINC PLATED
-
Hanging of pipe routes, ventilation and other fastenings when threaded rods are required. It’s possible to remove the fastener easily without leaving any protruding parts.
-
The drop-in anchor EKD-K is approved as a fastener in a redundant* system for a non-structural application in cracked and non-cracked concrete. Anchors with a setting depth of at least 30 mm are also approved for load-bearing installation in non-cracked concrete. Drop-in anchors with a setting depth of 25 mm are approved in pre-tensioned hollow core slabs. Installation must be carried out using the intended tool.
- Approved for installation in cracked concrete in a redundant system*
- Approved for load-bearing installation in non-cracked concrete
- Approved for installation in pre-tensioned hollow core slab elements in a redundant system*
- Foundation fixing that reduces the risk of impact with reinforcement
- Metric thread that allows installation of several types of fasteners
- FM approval for installation of sprinkler systems (M10-M20)
- Approved for installation of sprinkler systems in accordance with VDS, GmbH (M8-M16)
- Fire tested in C20/25 to C50/60 concrete
* Redundant means that several fasteners together carry a load and allow one to fail, but the remaining fasteners must then be able to handle the load.
Technical Specification
| Application environment | Indoors |
| Approvals | CE,ETA |
| Corrosion resistance class | C1 |
| Material to install in | Concrete,Stone,Natural stone |