Collated hard drywall screw XTR, bright zinc plated
-
ESSVE Hard drywall screw XTR is designed for the installation of extremely hard board materials, such as extreme hard drywall, fibre cement boards and the like. It is intended for indoor use against wooden-, lightweight- and reinforcement studs. Drill capacity 0.4-2.0 mm.
-
The screw is manufactured of hardened carbon steel with galvanized surface treatment. It is equipped with Phillips crosshead PH2.
The screw has a thicker outer diameter and shank to withstand the forces that can occur when fastening extremely hard boards.
It has a drill tip to penetrate the board without splitting it, which means that it works well in reinforcement studs too. The underside of the head has a patented swirl cutter that countersinks the screw without causing swelling or scraping.
When installing wooden studs, it is a little slower than a screw with a sharp tip, but the drill tip is needed to remove board material and minimise cracking and swelling in the board.
-
A collated screw gun with depth stop should be used for quick and efficient installation. Recommended rpm: 2000-2800/min.
XTR recommended material thickness:
XTR Hard Drywall Screw for Wooden Studs
- 30 mm – for boards up to 13 mm thickness
- 45 mm – for boards up to 26 mm thickness
XTR Hard Drywall Screw for sheet metal Studs
- 30 mm – for boards up to 18 mm thickness
- 45 mm – for boards up to 31 mm thickness
Technical Specification
| Application environment | Indoors |
| Approvals | CE |
| Head shape | Countersunk |
| Corrosion resistance class | C1 |
| Material to install in | Steel,Wood |
| Surface treatment | Zinc plated |
| Certificate |
|---|
| General Product Safety Regulation (GPSR) |
| Declaration of performance |
| XTR-4.2-EZP (EN) |
| XTR-4.2-EZP (EN) |
| Product Data Sheet |
| Product data sheet |